dpi logo200

Derma Protect + Innovation GmbH
Division Metalworking

Siemensstrasse 6
88048 Friedrichshafen
Germany
Tel.: +49 (0)7541-591224
Fax: +49 (0)7541-591225

ISO 9001 farbe en

 

SMF®02

SMF®02  is an oil and solvent-free metalworking fluid which fulfills further positive properties:

  • soluble in water
  • non-combustible
  • biodegradable
  • skin-friendly
  • dermatologically and toxicologically tested
  • odorless
  • excellent cooling properties
  • non-dangerous goods
SMF®02 can be used to machine steel, hardened or high-alloy steel, nickel-based steel, gray cast iron, titanium and many other materials for shaping operations, which are either cutting or non-cutting. When machining non-ferrous metals, we recommend the use of our SMF®02 BM, which has been specially developed for this purpose.
SMF®02 can be used in the field of metal working for drilling, turning, cutting, milling and many other applications. The product can also be used for grinding.

SMF®02 has excellent cooling properties and often allows higher cutting speeds with longer tool life. The machines and work pieces are protected by an integrated corrosion additive. When using SMF®02, the surfaces of the workpieces do not get sticky or oily. The machines, devices and the working environment remain clean. This results in considerable cost savings in machine cleaning.

Let us convince you! Talk to us about a trial at your company!
 

SMF®02 BM

SMF®02 BM  is an oil and solvent-free metalworking fluid with special additives for non-ferrous metal which fulfills further positive properties:

  • soluble in water
  • non-combustible
  • biodegradable
  • skin-friendly
  • dermatologically and toxicologically tested
  • does not contain emulsifiers, stabilizers or other additives
  • odorless
  • excellent cooling properties
  • non-dangerous goods

SMF®02 BM has the same excellent properties as SMF®02, but is also suitable for machining of non-ferrous metal, such as hardened and tempered steel, gray cast iron, titanium, copper, brass, aluminum and many other materials. Special additives reliably prevent stains on workpieces, as well as cobalt and other metals do not pass into solution and corrosion due to the electrical potential difference between different metals.

For the exclusive processing of aluminum, we recommend our SMF®07 ALU, which has been specially developed for this purpose.

SMF®02 BM can be used in the field of metal working for drilling, turning, cutting, milling and many other applications. The product can also be used for grinding.

SMF®02 BM has excellent cooling properties and often allows higher cutting speeds with longer tool life. The machines and work pieces are protected by an integrated corrosion additive. When using SMF®02 BM, the surfaces of the workpieces do not get sticky or oily. The machines, devices and the working environment remain clean. This results in considerable cost savings in machine cleaning.

Let us convince you! Talk to us about a trial at your company!
 

SMF®07 Plus

SMF®07 Plus is an oil and solvent-free metalworking fluid for heavy metal cutting, deep-hole drilling and broaching, which fulfills further positive properties:

  • soluble in water
  • non-combustible
  • biodegradable
  • skin-friendly
  • dermatologically and toxicologically tested
  • odorless
  • excellent cooling properties
  • non-dangerous goods

SMF®07 Plus is a universal product and can be used with almost all metals and materials (with restrictions also for aluminum). The product is specially designed for the machining of high-alloyed, heat-resistant, rustproof and stainless steels, titanium, titanium alloys, chromium nickel alloys, e.g. Inconel, Hastelloy, non-ferrous metals and many other materials and metals, but especially for those materials and metals which apply high to higher standards on the machining processes.
The product is used for drilling, turning, milling, honing, sawing, cutting and deep hole drilling.

High coolant pressures, ultrafiltration or the use of centrifuges for coolant purification present no problem for our products. A low drag-out rate of the metalworking fluid is achieved through the good draining behavior of our products. Due to the modified surface properties of the product a faster drying of the surfaces in the machine and on the workpieces, is achieved.

Let us convince you! Talk to us about a trial at your company!

SMF®07 ALU

SMF®07 ALU is an oil and solvent-free metalworking fluid to machine aluminum, their alloys as well as other not easy to process metals and their alloys, which fulfills further positive properties:
  • soluble in water
  • non-combustible
  • biodegradable
  • skin-friendly
  • dermatologically and toxicologically tested
  • odorless
  • excellent cooling properties
  • non-dangerous goods

SMF®07 ALU is the most additive product of the SMF® family.

It is used wherever a strong non-ferrous metal protection is required against staining and electro-corrosion, or during deep-hole drilling, broaching and slotting. Also, suitable for drilling and tapping aluminum forging alloys (requirement is the use of suitable tools). Can also be used for all other materials and machining.

All other specifications are similar to the other SMF® products.

Let us convince you! Talk to us about a trial at your company!

AMF®07

AMF®07 is an oil and solvent-free metalworking fluid to machine metals, which are especially used in the aircraft industry, and fulfills further positive properties:
  • soluble in water
  • non-combustible
  • biodegradable
  • skin-friendly
  • dermatologically and toxicologically tested
  • odorless
  • excellent cooling properties
  • non-dangerous goods
AMF®07 is a universal product and can be used for machining Inconel, Hastelloy, Aeralloy, stainless steels, titanium, chromium nickel alloys, aluminum alloys as well as carbon fiber reinforced composite and many other materials. The product is used for milling, drilling, turning, grinding, cutting and many other applications. AMF®07 can, of course, also be used for the machining of plastics and non-ferrous metal alloys.

It has excellent cooling properties and often allows higher cutting speeds with longer tool life.
The surfaces of the workpieces do not get sticky or stained. The machines, devices and the working environment remain clean. High coolant pressures, ultrafiltration or the use of centrifuges for coolant purification present no problem for our AMF®07.

Let us convince you! Talk to us about a trial at your company!